Sunday, November 27, 2022

What Is the Benefit of Using a DIP LED Smd Screen Module?


DIP is an abbreviation for Dual In-Line Package, which is similar to Smd Screen. A DIP lamp bead is a small lamp bead with two parallel pins made of plastic.

Through-hole electronic component packaging with two parallel rows of connecting pins that can put into sockets or through-hole installed is available. A DIP LED Smd Screen module has three types of LEDs: R, G, and B, which represent the primary colors red, green, and blue.

DIP LED was popular in the 1970s and continues to be popular today, particularly among clients that require outdoor LED displays.

What Exactly Is SMD LED?

Surface-mounted device (SMD) Lamp cups, brackets, wafers, leads, epoxy resin, and other components are encase within lamp beads of varied sizes and specifications, known as surface-mounted devices (SMD).

A single package of SMD LEDs contains three LED bulbs: one each of red, green, and blue (RGB). This package is then linked to the circuit. As a result, the arrangement of the red, green, and blue LEDs will be alter.

LED packing technology has evolved in response to the desire for smaller pixel pitch and higher resolution LED displays, which have become increasingly common. Since the company’s inception in the 1970s, its market share has steadily increased over time.

SMD LED modules are more ideal for indoor small pixel pitch displays than DIP LED modules, which are more suitable for outdoor displays. It is currently considered to be the cornerstone of the worldwide LED industry. However, DIP LED cabinets are more typically utilised as permanent LED displays than they are for rental LED displays or for fixed LED displays.

Smd Screen

What Exactly Is COB LED?

Chip-On-Board (COB) refers to an LED packaging strategy that integrates the chip directly into the printed circuit board (PCB) board in order to improve packaging efficiency and reduce distance between lamp beads. After that, it will be cover with adhesive to keep it from becoming contaminated.

COB LED modules, in particular, have a higher lumen density than DIP or SMD LED modules of the same size, which is notable.

On a 10mm by 10mm display module, for example, using COB LEDs results in 38 times the number of LEDs produced by DIP or SMD technologies. A COB LED display with an extremely low pixel pitch (less than 1mm), increased brightness, and improved uniformity can be achieve as a result.

Additionally, COB LEDs Smd Screen have the potential to save both space and electricity while keeping the same display quality.

When it comes to LED modules, what’s the difference between DIP, SMD, and COB?

As previously said, we now understand the three most prevalent LED packaging methods: DIP, SMD, and COB. Perhaps you’re wondering how to select the greatest LED display screen to purchase or rent.

In order to discover a solution, we must first weigh the advantages and disadvantages of each alternative. Then we’ll look into which software would be the most appropriate for our particular case.



DIP LEDs with a larger surface area emit more light. DIP LED Smd Screen modules are capable of producing up to 7,500 nits and even 10,000 nits in some cases.

In the case of outdoor LED screens, this is a significant advantage because brightness is a key aspect in the final effect.

(2)Less consumption of energy

When compared to SMD LED displays, DIP LED screens typically consume one-third the amount of electricity. It is both cost effective and environmentally friendly to reduce electricity consumption.


Because of its improved heat dissipation, it has a longer life span than SMD LEDs. As a result, the life of DIP LED modules can be increase by up to 100,000 hours.

(4)Cold soldering is almost never a problem

Because of the packing strategy, SMD LEDs may pose issues while installing the LED lamp bead on the printed circuit board (PCB).


DIP LED modules are more waterproof than SMD LED modules as a result of the packaging used. DIP LED modules are typically waterproof to an IP65 rating.

The presence of water or moisture in the display will shorten its life and diminish its performance. Consequently, DIP LED displays can be use for outdoor LED displays that must be waterproof in order to be effective.


(1)A more in-depth view

DIP LED modules feature a large pixel pitch because of the size of the LED lamp beads used in them. In addition, DIP LEDs are no longer supported for pixel pitches greater than 6mm.

As a result, they are unsuitable for some indoor LED displays that need small pixel sizes, such as plasma displays.

(2)An elongated perspective

When compared to an SMD LED module, the viewing angle is narrower (70-110 degrees).


(1)A more pleasing visual effect than DIP LED modules, for example

More colour accuracy and wider viewing angles are among the benefits of SMD LED panels. They also feature shorter viewing distances and more colour fidelity.

(2)The cabinet is both slim and light in weight

Because of the packing technique used in SMD LED cabinets, it is simple to assemble and disassemble them.

(3)Design that is consistent

The internal components of the module are protect by a robust layer that is locate within the module.

(4)Extremely long service life

SMD LED modules have a lifespan of 50,000-100,000 hours if they are utilize appropriately.

(5)Reasonable manufacturing costs

Because it is the most widely used LED screen product, production costs have fallen and technology has evolved as a result of this.

Smd Screen


Despite the fact that this technology has been develop for many years and is widely used in the international indoor or outdoor LED display industry, certain issues remain, such as anti-glare, anti-static, and higher levels of waterproofing in outdoor applications.

SMD cabinets for fine pixel pitch LED displays in indoor applications may be beneficial.

Advantages and disadvantages of 4.3 COB LED


Ideal for use with fine pixel LED screens

In part due to the fact that COB LED chips are directly connected to the PCB board, the space between two pixels can be extremely small. Photographs with higher resolution can be more detailed than those with lower resolution.

Manufacturing has been streamline.

Because COB LEDs have a more straightforward structure than SMD LEDs, the manufacturing process is less complicated.

Heat dissipation has been improve.

As previously stated, the fundamental structure of COB LEDs aids in the dissipation of heat.


From the outside of the lamp bead devices, there will be no indication of pins. This feature helps to reduce pin oxidation, which helps to prevent lamp bead failure.


(1) Surface that is uneven

As a result of the fact that each LED lamp bead potted individually, surface evenness may be impair. This will cause the display to become more sluggish.

(2)An inexperienced way of manufacturing

The reject ratio of this LED may be higher than that of the other two LEDs, resulting in higher production costs. An further source of worry is the lack of colour and brightness consistency.


This essay will look at three prominent LED technologies: DIP LED modules, SMD LEDs, and COB LEDs. DIP LED modules are small, inexpensive LED modules that can be use in a variety of applications. Then, in order to assist you in making your decision, we evaluate and contrast their pros and downsides.

General speaking, diode-based LED modules (DIP) mustangled are the ideal solution for outdoor LED displays that do not demand near viewing but must be protect from the elements. It is widely used in outdoor LED displays and LED signage, among other applications. If you require a high-resolution LED display, SMD and COB LEDs are the best options. SMD LEDs, on the other hand, may be preferable due to a variety of unresolved COB LED defects. Of course, you have the option of doing a thorough examination of your problem or contacting us for help!


Please enter your comment!
Please enter your name here



Related Stories