We’ve all been there before. You have a leaky pipe, toilet, or shower and you’re running around trying to find a plumber or handyman to fix it. Well, it turns out that fixing the plumbing problems in your home can be quite difficult, especially when you have no idea where to look. So, what is the best way to go about finding a reliable plumber? And how do you know if they are really the ones who can handle the job and you won’t end up having to pay them a lot of money in the end? This article will walk you through all these things, so that you can get a better understanding of the issues that arise with your plumbing.
1. Drain Pipes
When a drain pipe gets clogged, you need to make sure that you check the pipe for blockage. You should also be sure to check whether or not there is a backup in your sink, bathtub, or toilet. In order to find out if there is a leak, you should first be sure to put a bucket under the drain to catch the water. If there is no leak, then the drain will be clear. However, if there is a leak, then the water will be pouring into the bucket.
When this happens, you are going to need to find a reliable plumber. Because it’s going to cost you a ton of money to have someone come out and try to unclog the pipes. In fact, you’ll probably end up paying for the entire bill, which is why you should get a quote first from any plumber you’re considering hiring before signing on the dotted line.
2. Leaks from Faucets, Toilets And Sinks
Another thing that you should look out for is leaks from faucets, toilets, and sinks. When it comes to checking for a leak, you should make sure that you check for drips when you go to use the bathroom. Because if you do not see any, then it means that there is a leak somewhere. But, if you do see a drip, then you need to immediately call a plumber. If you are living somewhere in Toronto then call Toronto Plumber. They are professional and well-experienced plumbers.
3. Burst Toilets
Another common problem is when your toilet or your drain pipe bursts. This is usually caused by an excessive amount of pressure building up inside the pipes. You see, when water flows down the pipe, it exerts a certain amount of pressure on the walls of the pipe. However, when you stop the flow of water, that pressure is no longer being exerted on the walls of the pipe. Thus, if there is not another force (like a clog) to keep the water from going down the drain, then it will go.
4. Slow-Leaking Water Heaters
Another thing that you should be aware of is slow-leaking water heaters. In fact, when the water heater stops working properly, it can cause quite a bit of damage to your home. Thus, if you do not have a backup heater, then it’s important that you get your heater fixed right away.
If you have a slow leaking water heater, you should check the water temperature first. If the water is at least 120 degrees Fahrenheit, then you are going to be okay. However, if the water is below 120 degrees, then you need to contact a plumber right away.
5. Frozen Water Pipes
When a water pipe freezes, it can cause quite a bit of damage to your home. Because it will break off or crack, which could lead to flooding in your basement or other part of your home. Thus, if you ever find that your home water pipes are freezing. You need to make sure that you turn off your main water line. Then, you should start looking for any leaks. When you find one, you need to make sure that you look for any damage to the pipe and that you make sure that it has been fixed. In fact, when you find that your water is leaking. You should turn the water back on to see if it works again. If it does, then you’re all set. If it doesn’t, then you will need to contact a plumber.
6. Slow-Draining Water Zones In Your Basement
A common problem is when there is a slow draining water zone in your basement. This can be caused by a number of things. For example, it could be caused by a leaky water heater. It could also be caused by a broken water line. And, of course, it could be caused by a clogged sewer line. The truth is, it’s hard to tell exactly what is causing the problem. Thus, the first thing you should do is make sure that all your plumbing lines are tight and that there are no leaks. Then, if that doesn’t work, you should call a plumber.
7. Sewage Backups
Another common problem is when you have a sewage backup. You see, when you flush your toilet or if you use a sink. Then you are going to be flushing water down the drain and out the pipes. However, when there is no water to flow, then there is going to be no pressure. This can be dangerous, because when it comes to sewage, it is best to keep it away from you and your family. Thus, if you ever find that you have a sewage backup in your home, you need to make sure that you immediately contact a plumber.
Conclusion
Here are some of the most common plumbing problems that many homeowners run into each year, and how they can be fixed. Hopefully, this article will help you stay out of trouble. Of course, these are just a few of the many things that you can do to keep your home plumbing system working properly. Do you have any other suggestions? If so, feel free to share them with us by leaving a comment at the bottom of this page.Â
